Clipper Energy Supply Company




descargar 159.44 Kb.
títuloClipper Energy Supply Company
página3/3
fecha de publicación28.11.2015
tamaño159.44 Kb.
tipoDocumentos
med.se-todo.com > Ley > Documentos
1   2   3



PRODUCTO

LBS PARA ABSORBER 1 GAL DE HIDROCARBURO

COSTO RELATIVO

K-Sorb Fibra Hidrofóbico


0.6

USD 1.00

Polipropileno (Pads)


0.5

USD 1.50

Musgo de fibra de Madera


2.10

USD 2.95

Tierra Diatomatia


3.50

USD 7.50

Aserrín Tratado


4.00

USD 4.00





5 Tons de K-SORB u otros absorbentes por hora

Dispersa hasta 20 metros



RÉNTELO AHORA EN CLIPPER ENERGY !!
BOLTING – EMPERNADO
IAA y Clipper Energy introducen en el mercado el servicio de alquiler de la Unidad de Empernado Hidráulico BOLTECH:

  • Seguridad Industrial: Muchos trabajadores han perdido la vida por fallas en los torques de los pernos y espárragos.

  • Alargue la vida de sus equipos: Muchos motores y turbinas fallan por un mal torqueado en los pernos.

  • Control de fugas y emisiones: El torqueado correcto, evita problemas de medio ambiente y colabora con la Seguridad Industrial

























  • Potencial: Torque hasta el equivalente a 63,000.00 lbs/pie, en acero seco, 10,000.00 lbs/pie con lubricante de molibdeno especial. (Ver fotografía)**

  • Confiabilidad: Boltech ha estado en el mercado desde los años 70. IAA-Clipper han comprado equipos nuevos.

  • Los equipos necesarios para una Seguridad Industrial Total.



TORQUE REQUERIDO EN ESPARRAGOS ASTM 193-B7 (lbs/pie)


*Estas cifras son una guía no deben ser tomadas para uso en el campo

Se ofrece todo el Equipo en Alquiler a US $ 700.00 por día más IVA, con operador

* Puede haber un cobro adicional por ciertos tamaños. No incluye movilización, desmovilización y estadía.

Lubricante Especial para Empernado


  • Reduce el torque en 85% que se requiere para tensionar correctamente las tuercas

  • Evita daños en las tuercas

  • Especial para uso con los equipos Boltech



Adquiéralo en Clipper Energy Supply!!

TEXAS PRODUCTS, INC

DRILLING AND WELL SERVICE EQUIPMENT


  • SWAB CUPS - ALL RUBBER, WIRE REINFORCED & GW STYLE

  • GW STYLE CUP PACKERS & GW STYLE PACKER CUPS; CP CUPS

  • CAMERON STYLE TYPE F CUP TESTERS & PARTS

  • STRIPPER RUBBERS

  • SWAB MANDRELS, ROPE SOCKETS, SINKER BARS & TUBULAR JARS, SPANG JARS, STEMS, BAILERS

  • WIRELINE OIL SAVERS, HYDRAULIC PUMPS & HOSES, REPAIR PARTS FOR OIL SAVER & PUMP

  • OIL SAVER RUBBERS

  • PIPE WIPERS (DRILLING & WELL SERVICE)

  • WIRELINE FLAGS

  • GUIBERSON TYPE SPIDERS; T -60 TYPE SPIDER SLIP BODIES; T -40 & T -60 INSERTS

  • PIPE HANDLING TOOLS - TONG DIES & SLIP INSERTS FOR PIPE HANDLING TOOLS

  • B. O. P. RUBBERS & REPAIR PARTS - ANNULAR & SPHERICAL

  • PULSATION DAMPNERS & STABILIZERS

  • API COUPLINGS & API PUP JOINTS; FLOW COUPLINGS

  • BLAST JOINTS,"E" PUMP OUT SUBS, PUMP OUT PLUGS - INTERNAL EXPANDABLE CHECK VALVES

  • TUBING NIPPLES & GAS LIFT MANDRELS

  • ON/OFF TOOLS & PACKER PARTS

  • PROFILED LANDING NIPPLES "R", "F", "N", "OR", "RN", "X" & "XN"; "X' & "XN" LOCKS

  • CIRCULATING SLEEVES "L", "Z", "XO" & "XA", PARTS, REDRESS KITS, O-RINGS & SEALS

  • LINER HANGERS

  • PACKER STYLE PX PLUGS, BLANKING PLUGS & PACKING

  • SPECIALIZED, CUSTOM MACHINING NEEDS

  • PREMIUM THREADS (VAM, HYDRIL, THREAD MASTER, ATLAS-BRADFORD, NKK, INTERLOCK, NKEL,

  • OECO, KAWASAKI (FOX), TKC, MANNESMANN & API)

  • TIW BALL VALVE REPLACEMENT PARTS, SAFETY VALVE PARTS, KELLY VALVE PARTS & OPERATING WRENCH

  • BUTTERFLY VALVES - WAFER & LUG, EPDM, BUNA, VITON & TEFLON SEATS, AL BRONZE, ENP, DI,

  • 316SS NYLON COATES DISCS 2" - 24"

  • THREADED BODY STYLE BUTTERFLY VALVES 2" - 6"

  • SWING CHECK VALVES 1" - 3" THREADED DI BODY, 300# - 2000#

  • MUD PIT UNIONS - O-RING & AIR TYPE 4" - 16"

  • HAMMER SLEEVE PIPE COUPLINGS

  • STABBING GUIDES

  • STUDS & NUTS, BOLTS, LOCK & FLAT WASHERS

  • WECO STYLE HAMMER UNIONS 1" - 12" FORGED STEEL 1000# - 15,000#

  • GUIBERSON STYLE SEAL-O-MATIC UNION 1-1/2" & 2" - 6000#

  • FRAC TANK UNIONS 8"; FITTINGS - WELD, SCREWED, NIPPLES, TEES, CROSSES, ELLS

  • PROBES, PRONGS, BROACHES, SOFT RELEASE TOOLS, TUBING/COLLAR STOPS, TUBING SWEDGE

  • SHIFTING TOOLS, GO DEVIL, PARAFFIN CUTTER, TUBING END LOCATOR, WIRE FINDER, WIRELINE

  • GRABS, BOTTOM HOLE PRESSURE RELEASE

  • GLOBAL ROLLER CHAIN

  • INSTRUMENT CARRIERS




Fishing Tools


  • Overshots

    • Series 10 Sucker Rod Overshots

    • Series 20 Short Catch Sucker Rod Overshots

    • Series 70 Short Catch Overshots

    • Series 150 Releasing and Circulating Overshots

  • Series 150 Overshots Accessory Equipment

    • Extension Sub

    • Oversized Guides

    • Wall Hook Guides

    • Hollow Mill Extension Subs

    • Hollow Mill Inserts

    • Mill Guides

    • Cross-over Bushings

  • Lead Impression Blocks

    • Impression Block

    • Die Collars

  • Fishing Tools - Internal Catch

    • Releasing Spears

    • Releasing Spear Packoffs

    • Releasing Spear Stop Subs

    • Taper Taps

    • Crank Shaft Rope Spears

    • Center Prong Rope Spears

    • Marine Spears

  • Fishing Tools - Junk Retrieval

    • Core Type Junk Baskets

    • Reverse Circulation Junk Baskets

    • Full Flow Reverse Junk Baskets

  • Light Duty Ditch Magnets

    • Heavy Duty Ditch Magnets

    • Fishing Magnets

    • Fishing Magnet Chargers


Drilling, Milling and Cutting Tools


  • Junk Subs - Integral Welded Cup Type

  • Junk Subs - Removable Threaded Cup Type

  • Rotary Subs / Cross-over Subs

  • Junk Mills - Concave, Flat Bottom, Econo Types

  • Taper Mills

  • Pilot Mills

  • Window Mills

  • String Mills

  • Tungsten Carbide, Tinning Rod, Brazing Flux




  • Standard External Cutters

  • Hydaulic External Cutters

  • Internal Cutters

  • Multi-String Pressure Pipe Cutters


Accessory Fishing Tools


  • Tubular Wireline Jars

  • Hydraulic Wireline Jars

  • Hydraulic Fishing Jars

  • 'Z' Type Hydraulic Jars

  • Jar Energizers

  • Fishing Bumper Subs

  • Lubricated Fishing Bumper Subs

  • Surface Bumper Jars

  • Hydraulic Drilling Jars

  • Mechanical Drilling Jars

  • Coarse Thread Safety Joints for Tubing, Drill Pipe and Washover Pipe

  • Cable Hangers and Liners


QUALITY CONTROL STATEMENT


Clipper Energy Supply Co. will exercise various levels of quality control in regards to Purchasing, Shipping and Invoicing, depending on the needs of the customer. This quality control will be divided into three groups for new equipment, such as pipe, valves, fittings and other similar materials.

Quality Control Levels in Purchasing, Inspecting, Crating, Shipping and Billing
QC Level 1:

This is the minimum level of quality/documentation control for goods procured by Clipper for sale to customers. It will include the following steps at a minimum level:

  1. Comparison of customer’s PO with Supplier’s offer to assure they match. If any discrepancies are found, or if items are not correctly specified or are illegible, the person quoter in charge will contact the customer for clarification.

  2. Ordering of following materials when Clipper’s PO is sent to the supplier: (if applicable)

    • Product catalog to accompany billing

    • Material safety data sheets or DOT requirements for transport.

    • Installation, operation,service or similar manuals or information sheets should be ordered to include with shipment (sent to the warehouse, unless shipment will leave from some other point). If extra copies of these materials are available they will be included with the documentation and billing to the customer (but not sent to the bank with L/C documents)

  3. All quality control paperwork for QC 1 projects will be sent with billing to the customer, with no need to maintain copies for Clipper Shipping Files.


QC Level 2:

This is the intermediate level of quality/documentation control for goods procured by Clipper for sale to customers. It will include the following steps at a minimum level:

  1. Comparison of customer’s PO with Supplier’s offer to assure they match. If any discrepancies are found, or if items are not correctly specified or are illegible, the person in charge (see table below) will contact the customer for clarification.

  2. Ordering of following printed materials when Clipper’s PO is sent to the supplier: (if applicable)

    • Product catalog to accompany billing

    • Material safety data sheets or DOT requirements for transport.

    • Installation, operation,service or similar manuals or information sheets should be ordered to include with shipment. If extra copies are available they will also be included with the billing.

  3. Ordering of copies of MTR's when applicable. These MTR's can be copies of originals, but must be legible and complete. The name of the original supplier can be changed on this quality control level, and before being sent to the customer we can change the name of the original purchaser, using a Clipper tag. No other modification of an MTR will be allowed under QC level 2. The materials for which MTR's are required for level 2 are:

    • Steel fittings, forged, welded or formed, such as A105, A234 WPB, 316L, etc.

    • Steel pipe, Seamless and ERW or Fusion Welded, or Sprial Welded, to any of the usual pipe norms (A53, A106, API 5L, Grades A-D), etc.

    • Steel plate and structurals to any common industry standard (A36, A516, A515, A283, etc.)

  4. Under QC 2 for other components purchased by Clipper, a Manufacturer's Compliance Certificate (MCC) is acceptable, or, if unavailable then a Supplier's Compliance Certificate (SCC) from the wholesaler is acceptable.

  5. Under QC 2 Clipper's warehouse will be responsible for confirming that the MTR's and/or MCC's and SCC's correspond generally to the materials shipped on the order. The warehouse supervisor is reponsible for filling in a QC Checklist for projects which are QC2 or QC3. If the materials on a QC2 project do not pass through our warehouse, then we will provide the supplier with a Supplier's QC Checklist, on Clipper Stationary, unless the supplier has provided Clipper previously with a copy of their QC manual.

  6. All Quality Control paperwork for QC2 projects will be sent to customer with billing, and will also be maintained in a copy in the shipping file for a period of six months after shipment has occurred.


QC Level 3:

This is thehighest level of quality control and will apply whenever third party quality control or ASME/API/ISO requirements are in effect according to customer’s PO. Tthis will also include any project that has more stringent standards than usual, such as Charpy Impacts, Hydrostatic Tests, Flow Tests, Operational Tests, Ultrasonic, HIC requirements, etc.

  1. Comparison of customer’s PO with Supplier’s offer to assure they match. If any discrepancies are found, or if items are not correctly specified or are illegible, the Quoter in charge will contact the customer for clarification.

  2. Backup comparison of Customer PO, Supplier Quote and Clipper PO by Clipper Expeditor

  3. Ordering of following printed materials when Clipper’s PO is sent to the supplier: (if applicable)

    • Product catalog to accompany billing

    • Material safety data sheets or DOT requirements for transport.

    • Installation, operation,service or similar manuals or information sheets should be ordered to include with shipment. If extra copies are available they will also be included with the billing.

    • MTR’s, which must be provided with Billing and with material shipment to Clipper warehouse. (Advise seller of requirement to provide MTR´s with Truck Bill of Lading.

  4. Ordering of copies of MTR's is required. These MTR's can be copies of originals, as long as they are signed in original by the seller if the seller is not the original manufacturer,but in any case all MTR’smust be legible and complete. The name of the original supplier cannot be changed on this quality control level of quality control. No modification of an MTR will be allowed under QC Level 3 The materials for which MTR's are required for level 3

    • Steel fittings, forged, welded or formed, such as A105, A234 WPB, 316L, etc.

    • Steel pipe, Seamless and ERW or Fusion Welded, or Sprial Welded, to any of the usual pipe norms (A53, A106, API 5L, Grades A-D), etc.

    • Steel plate and structurals to any common industry standard (A36, A516, A515, A283, etc.)

  5. Under QC 3 for other components purchased by Clipper, a Manufacturer's Compliance Certificate (MCC) is acceptable, but a vendor’s supplier certificate is not acceptable alone, without the supporting documentation from the original manufacturer.

  6. Under QC 3 Clipper's warehouse will be responsible for confirming that the MTR's and/or MCC's correspond exactly to the materials shipped on the order. The warehouse supervisor is reponsible for filling in a QC Checklist for projects which are QC2 or QC3. If the materials on a QC2 project do not pass through our warehouse, then we will provide the supplier with a Supplier's QC Checklist, on Clipper Stationary, unless the supplier has provided Clipper previously with a copy of their QC manual.

  7. All Projects which have third party inspection requirements will be considered QC3. Also projects in which materials are supplied to manufacturers with API, ASME or similar certifications which require materials verification, will be handled as QC3, even if no third party inspection is required according to the Customer PO.

  8. All Quality Control paperwork for QC3 projects will be sent to customer with billing, and with the materials if possible. Since this is not possible with plate, pipe and structurals, these originals must be sent with the billing, but for fittings, valves and other materials, MTR’s, in clear and legible condition must be crated with the product, and will also be maintained in a copy in the shipping file for a period of 5 years after shipment has occurred, or until the file is destroyed after a minimum of 5 years from the date of shipment.


Jeffrey Casey

President
Maria Reyna Lopez

Quality Documentation Manager
Printed in Houston, TX, March 13, 2002.




1   2   3

similar:

Clipper Energy Supply Company iconGrade esl supply List 2015-2016

Clipper Energy Supply Company iconIn company intermediate syllabus unit

Clipper Energy Supply Company iconSeaweeds & Agar Company Pacific E. I. R. L. Chile

Clipper Energy Supply Company iconEdición por Business Technologies Company btc noticiero Oficial ©

Clipper Energy Supply Company iconFor solvatochromic dipolarity micro-sensor behavior in binary solvent...


Medicina



Todos los derechos reservados. Copyright © 2015
contactos
med.se-todo.com